Monitoring & Police Response

Monitoring & Police Response

For increased security you may wish to have your security system monitored.

A monitored alarm is one that is linked via the telephone line or cellular network or both to an Alarm Receiving Centre (ARC).

Monitored Systems

 

The system installed may be the same as (or similar to) a bells-only system, except that - when the alarm is activated - an integral modem informs the Alarm Receiving Centre via a burst of data much the same as a fax tone.

select security systems southern monitoringDependent upon the signal received & the design of the Intruder Alarm System the Alarm Receiving Centre will be able to confirm if the alarm condition is un-confirmed (1 detector triggered) or Confirmed (2 detectors triggered) at which time the Police are alerted.

With this point in mind, it is important that the alarm is designed correctly to ensure that should a burglary occur the alarm will trigger 2 separate zones quickly before the intruder can get to far into the property.

It is important that the monitoring centre is recognised by the Police.

A unique reference number (URN) - which identified the premises - must be obtained by the Installing Company from the Police, when the system is installed.

To get this number, the installer and the monitoring centre must be registered with a certification body - such as the SSAIB.

Monitored systems do not guarantee a Police response.

If it is reasonably certain that someone has entered the premises, it will be flagged as a confirmed activation. However, if a system has three false alarms in a year - four in Scotland - the URN will be revoked by the Police.

To be reconnected, evidence that the problem has been resolved must be provided to the Police within three months.

 

Types of Monitored System

Digital Communicator /DigiCom

This is the most common method of signalling at this time, and communicates with the Alarm Receiving Centre (ARC) via the properties telephone line, operational costs are low, but if installed incorrectly or where the properties incoming phone line can be easily compromised this method of monitoring will be made ineffective if the phone line is cut or disabled.

 

RedCare Monitored Phone Line

select security systems bt redcareThe Redcare Classic product now has crucial, third-party certification that meets rigorous insurance requirements for Alarm Transmission Systems (ATS).

This LPS 1277 certification is the strongest assurance you can get that your alarm signalling system is the best choice available.

Redcare Classic is a grade 4 system that offers the most secure form of alarm signalling available.

The service provides continuous monitoring of the BT telephone line that links a professionally installed alarm system on a customer’s premises to an Alarm Receiving Centre (ARC).

The result is continuous protection, every second of the day, every day of the year.

Unlike other alarm signalling services, Redcare both alerts the ARC when it detects a line cut AND provides encryption to prevent the substitution of equipment or "spoofing" (emulation) of line conditions.

This is why Redcare is the most secure system of its kind.

Key benefits and features:

• No need for an extra telephone line (a Modem Compatible Device may be required if fax and data services are to be used on same line).

• Active, continuous 2-way monitoring - 24 hours a day, 365 days a year.

• High-speed alarm transmission summons help within a matter of seconds.

• Alarm signals can be delivered to the ARC even when the phone is in use.

• Encrypted signals which cannot be replicated.

• Instant detection if your phone line has been cut.

• Our duplicated network ensures the highest levels of resilience.

• No additional call charges.

• Ideal security and fire detection application for any home or business.

 

DualCom Dual Signalling

gemini security solutions dualcomThe DualCom GradeShift range offers a single piece of hardware for every grade of risk with interchangeable EN Grades.

Single path options G2r and G3r utilise all mobile networks via their WorldSIM to signal an alarm and are the ideal solution where there is no telephone line available.

Dual path options G2, G3 and G4 utilise multiple signalling paths via their WorldSIM & the properties landline to signal an alarm and have been designed with the lowest to highest risk premises in mind.

You simply pick the grade required.

DualCom is trusted to protect hundreds of thousands of premises throughout Europe including many major retail brands.

 

Key benefits and features:

• Multiple signalling paths on board - GPRS, LAN/IP and telephone

• Detects signalling path failure in seconds (line cut, GSM blocking, network failures)

• Dual signalling is preferred by insurance companies and the Police

• GradeShift enables remote up/down grade for change in insurance specification

• EN Grade 2/DP1 dual path signalling service

• Polling via Gemini every hour

• Upgrade to GradeShift UDL available

• Multi-network WorldSIM as standard for increased reliability

 

DualCom DigiAir

The DualCom DigiAir utilises all mobile networks via the DualCom WorldSIM instead of a telephone line to signal an alarm from the protected premises to the Alarm Receiving Centre (ARC).

gemini security solutions dual com digiairIt is designed for low to medium risk premises and is an ideal upgrade for wired digital communicators as it eliminates call costs and phone charges.

DigiAir is small enough to fit into any existing or legacy control panels.

It can be supplied complete with a Compact Power Supply for installations where the control panel is unable to consistently provide 12v DC and provides a more aesthetically pleasing finish.

DigiAir is also unaffected by Next Generation Networks (NGNs).

Like all CSL products, DigiAir is supported by the Gemini Platform, a Critical Connectivity platform responsible for the integrity of hundreds of thousands of premises throughout Europe.

Key benefits and features:

• Eliminates call costs and phone Charges

• WorldSIM as standard to increase reliability and reduce false alarms

• Designed for maximum panel compatibility

• Small enough to fit into any existing panel

• Dial Capture provided as standard

• Fast Format, Contact ID and extended SIA

• Unaffected by NGNs

• Patented Technology - GB2465833

• Can be pre-fitted to Compact Power Supply if required

 

CSL Connected

In partnership with the industry's leading Panel Manufacturers CSL Connected has combined their Critical Connectivity with your chosen alarm panel with the added option of an end-user App.CSL Connected

This offers installers professionally monitored signalling designed to discourage self-monitored systems that bypass Alarm Receiving Centres (ARCs).

End-User Apps

Smart Alarm Systems are growing in popularity as more end-users opt for Apps to control smart devices in their home from their phone. These Apps allow users to Set and Unset their alarm system, view and control cameras, receive real-time alerts and much more from the palm of their hand.

Until now Apps have only been available with self monitored systems but more end-users are demanding Smartphone Apps plus reliable ARC connectivity.

Now you can have both with CSL Connected.

Professional Monitoring

Utilising the control panel's communication hardware, CSL Connected provides connectivity directly into the Gemini Platform and onto the ARC. Gemini is CSLs Critical Connectivity platform responsible for the integrity of nearly half a million premises throughout Europe.   

gemini security solutions murano gates

 

 

            

 

HELPING OUR CUSTOMERS REST IN THE KNOWLEDGE THAT THEIR SECURITY REQUIREMENTS ARE IN GOODHANDS  

 

gemini group logos

 

 

 

"Large Enough to Cope, Small Enough To Care"

 

 

Please Contact Us For a Free No Obligation Quotation